AVR ATMEGA 28pin Mini sized Project Board with ATMEGA8 / ATMEGA328 / ATMEGA328P

AVR ATMEGA 28pin Mini Project Board The Atmel AVR ATMEGA 28pin Mini Project Board is a robust platform for developing code and prototyping. It utilizes both ATmega16/32 microcontrollers, which are powerful AVR microcontrollers from Atmel. This board is ideal for a wide range of applications and includes various hardware components to test out the peripheral features of the devices. Additionally, the board boasts a convenient configuration of all microcontroller pins by PORT. It also includes numerous peripherals like LCD, LEDs, and RS232 serial interface on a double-sided PTH PCB board for added durability and reliability. Characteristics of AVR ATMEGA 28pin Mini Project Board Sleek and Convenient Design, Ready for Immediate Use Expert PCB Layout Design for EMI/RFI Compliance and Reduced Noise Enhance the durability of your PCB with a double-sided design featuring high-quality PTH components. The Board is compatible with AVR ATmega16/ATmega32 Microcontrollers. External power can be supplied through either a screw terminal or a DC jack. The External Power Supply is compatible with a voltage range of 5V to 12V. Option to use a standard 9-12V power supply as an adaptor. The board is compatible with both LCDs, including 16×2 and 20×4 in 4-bit mode, as well as graphical LCDs. The RS-232 interface, which allows for a direct connection to a PC’s serial port, comes equipped with MAX232. This particular I2C EEPROM (4K-AT24C04) is installed on the board. On the I2C RTC (DS 1307), there is a crystal and battery for onboard use. The 7-segment LED display is multiplexed on board eight times. The keyboard on board features a 4×4 matrix design with 16 keys. This keyboard features a set of 8 user keys, conveniently located on board for easy access during use. An 8 LED interface is included on board for I/O testing. Located on the 8 DIP Switch while onboard. The External interrupt and Reset buttons are both available on board. In addition, there is a Potentiometer interface for ADC on Board 2 which includes channels CH1 and CH2. The LM358 Op Amp is used in conjunction with the IC DAC0808N on board. There are two relays on board, with ratings of 7.5A and 250VAC for one and 7A and 14VDC for the other. The interface on the ULN2003 and L293D Motor Drivers are both included on board. Featuring a 5×7 dot matrix display onboard. The MCP2551 IC serves as the interface for the CAN transceiver on board. The interface for the on-board piezo buzzer. The PWM Output pin on the board. The LDR and NTC Thermistor IC are both on board. Bluetooth interface support is available on board. Support for the ESP8266 interface is available on board. Incorporating Micro SD Card Support on Board. Welcome to the XBee Interface on board. The ISP connector is used on boardOn a boat we use the ISP connector to connectThe ISP connector is utilized on board, when we are working with our internet service provider. The 16 MHz crystal oscillator is installed onboard. An onboard LED illuminates to indicate power status. The socket connector on board supports both power and serial communication through a MICRO USB TYPE B port. Reverse polarity protection for the power supply.